ⓘ
The Solution Section (FAQ)
What is the difference between a regular stall mat and a horse stall mattress from Mats Inc.?
A standard mat is solid rubber laid over your stall floor for cushioning and traction. A Mats Inc. mattress is a multi-layer system that uses soft foam or rubber crumb filler under the surface for deeper cushioning, more shock absorption, and better insulation from cold, hard floors. It functions more like a bed than a mat, which is why it's recommended for older horses with stiff joints, performance horses under heavy workload, and recovery stalls for injured animals.
How thick are the Mats Inc. stall mats, and what surfaces can they go over?
Thickness varies by product: the Hammer Top 4x6 Stall Mat and the Horse Stall Kits are 3/4 inch thick, while the 4x6 diamond-plate Stall Mat is 5/8 inch. The mats can be installed over virtually any surface, and the Hammer Top can even be embedded into fresh concrete so it bonds to the surface. They lie flat without curling and resist shifting under heavy traffic, and they won't crack, peel, or crumble.
Do you offer a single-piece stall mat instead of multiple interlocking pieces?
Yes. Mats Inc. is one of the only companies that offers a true single-piece oversized equine stall mat. The One Piece Horse Stall Mat provides a seamless, durable rubber surface with superior cushioning to reduce stress on a horse's joints, plus excellent traction. Its non-porous surface resists moisture for a cleaner, more hygienic stall, and it's built for barns, stables, and horse trailers under heavy use.
I need a mat that drains for my wash rack. Does Mats Inc. have one?
Yes. The Comfort Grid Stall Mat comes in a 4 foot by 5 foot size with 2 inch by 2 inch holes that let liquid drain through while still providing anti-slip, anti-fatigue cushioning. Mats Inc. also offers other mats with drainage features for specific applications like wash racks, vet areas, and custom builds. If you're not sure which drain-through option fits your setup, you can call and they'll help you choose.
Are Mats Inc. mats hard to install?
No. Most customers install their own stall or trailer mats with basic tools and a little time. The mats are pre-cut or trim-to-fit, most lay flat and stay put due to their weight and design, and no glue is required for most applications. Mats Inc. provides installation instructions and guidance, and will walk you through any specialty situation such as a sloped ramp or hot-water wash area.
Does Mats Inc. ship nationwide, and are there discounts on large orders?
Yes to both. Mats Inc. ships nationwide using reliable freight carriers, arranging LTL (less-than-truckload) freight for standard orders and full truckload delivery for big projects. For bulk orders of 20 or more mats they can provide a custom quote based on quantity and shipping location, and they regularly work with large stables, training facilities, breeding operations, and equine rescue centers.
How can Mats Inc. offer wholesale prices, and what warranty backs the products?
Mats Inc. sells direct with no dealer network, so there are no middlemen or markups, which keeps prices low and customer service direct. The company has over 60 years of industry experience and sources premium rubber and foam built for longevity, traction, and shock absorption. The Horse Stall Mattress system is constructed with 1 1/4 inch thick vulcanized rubber and is backed by a 7 year warranty.
How do I get a quote or figure out the right mats for my barn?
Tell Mats Inc. about your horses, barn, and property and they'll help you find the best solution for your space and budget, whether you need one mat or a whole facility. You can reach Mats Inc. at 800-234-1492 or Mats@Mats-Inc.com, or visit https://mats-inc.com/ to browse the stall mats, mattress systems, stall kits, and Comfort Grid options.
Who is Mats Inc. and how long have they been in business?
Mats Inc. is a commercial and equine flooring supplier that has been in business since 1964, giving it over 60 years of industry experience. The company supplies matting to barns, veterinary facilities, equine centers, and commercial operations across the U.S. Its tagline reflects that focus: 'We Care About Horses Every Step Of The Way.'
What horse stall mats does Mats Inc. sell?
Mats Inc. offers a full equine matting program built around the LRP Matting line. It includes the 4x6 Stall Mat, the diamond-plate Soft Stall Mat, the Hammer Top Mat, anti-slip Trailer/Ramp Mats, the Econo Mat, and the open-grid Comfort Grid Horse Stall Mat. Sizes scale from single-stall mats up to large one-piece mats that cover an entire stall.
What are Mats Inc. horse stall mats made of?
The LRP equine mats are manufactured from a fiber-reinforced rubber compound branded FRC, which is a reprocessed and upcycled rubber. The reinforcing fibers make the mats tough enough that, per the manufacturer, they will not peel, crack, curl, or crumble. The rubber is non-porous, so it resists absorbing moisture, urine, and odors.
What thicknesses are available for the 4x6 stall mat?
The 4x6 Stall Mat comes in 4' x 6' x 3/4" and 4' x 6' x 5/8" configurations. The 3/4" version weighs about 115 lbs and the 5/8" version about 91.5 lbs. The mats have a diamond-top profile, and the bottom can be smooth or studded depending on the application.
How do rubber stall mats help my horse?
Heavy-duty rubber stall mats offer a cushioned, non-slip surface that helps reduce joint fatigue, stress, and slipping. They absorb shock that would otherwise transfer into the horse's legs, knees, and hooves, and they insulate against cold, hard sub-floors. They also provide reliable traction in both wet and dry conditions.
What is the Comfort Grid Horse Stall Mat?
The Comfort Grid is a drainage mat built for the wettest, highest-urine-load areas of a barn. Each section runs 4' x 5' at 1" thick with 2-inch-square open grid holes that let urine and water drain straight down to the base instead of pooling on top. It solves the standing-moisture problem that solid flat mats cannot.
How should the Comfort Grid mat be installed?
The Comfort Grid must be installed over a properly draining base so liquid that passes through the grid has somewhere to go. Installed over a free-draining base and cleaned on a normal routine, it holds up for years. The common failure mode is putting it over a sealed slab, where drained moisture has nowhere to escape and pools underneath.
Can Comfort Grid mats save money on bedding or sand?
Yes. In sand-bed stalls the open grid keeps the sand bed more level and can reduce sand use by roughly 35-40%, lowering ongoing cost. By draining liquid off the walking surface quickly, it also minimizes daily stall maintenance compared with solid mats that trap urine on top or wick it into bedding.
Why does Mats Inc. advertise wholesale prices?
Mats Inc. sources its equine mats direct from the manufacturer rather than through retail middlemen, which lets it pass mill-direct, wholesale pricing to barn owners. Its online listings show transparent price tiers, with options falling in the $0.00-$99.99 and $100.00-$199.99 ranges depending on size and thickness. This lets buyers compare cost against mat dimensions before ordering.
Who manufactures the LRP equine mats Mats Inc. sells?
The mats are made by LRP Matting, a rubber-flooring manufacturer that has been producing animal, agricultural, commercial, and industrial mats since 1971 and is part of the DRI Rubber group. The maker takes pride in offering some of the largest mats in the industry. That manufacturing depth is what stands behind the matting Mats Inc. resells.
Why do larger single-piece mats matter?
The manufacturer specializes in the largest mats in the industry, which simplifies installation and reduces the number of seams in any area. Fewer seams mean fewer places for bedding, urine, and dirt to work underneath, and fewer edges that can shift or curl. For full-stall layouts, large one-piece mats provide more stable, longer-lasting coverage.
Are these mats slip-resistant?
Yes. LRP equine mats use textured surfaces such as diamond-plate, diamond-grid, and Hammer Top profiles to provide traction. They are designed to prevent slipping in both wet and dry conditions, which improves safety for horses in stalls, aisles, and wash areas. The Trailer/Ramp Mat in particular is built as an anti-slip surface for loading.
Will rubber stall mats absorb urine or hold odors?
No. The FRC rubber compound is non-porous, so it does not absorb moisture or urine, which makes the mats resistant to odors and easier to keep hygienic. For especially wet stalls, the Comfort Grid drainage mat carries liquid off the surface entirely. Both approaches help control ammonia buildup in working barns.
Do the mats work for horse trailers and ramps?
Yes. The LRP Trailer/Ramp Mat is an anti-slip rubber mat sized for trailer floors and loading ramps, available in dimensions such as 7.5' x 8.13' and 7.5' x 9.19'. It provides cushioning and traction during transport and loading, reducing slipping on what would otherwise be a hard, slick surface. It is part of the same FRC rubber family as the stall mats.
What other equine products are in the LRP line?
Beyond stall and trailer mats, the LRP animal line includes the Stall WallGuard wall protection (48" tall, 1/4" thick, in lengths up to 200' or custom), Alleyway Mats, Ring Mats for arenas, Slat Mats, Double Button mats, and Ground Protection Mats. This breadth lets a barn outfit stalls, aisles, wash bays, walls, and trailers from a single matting family. Mats Inc. can customize sizing to fit nearly any space.
What surfaces and spaces are these mats used in?
The mats fit horse stalls, barns, trailers, grooming areas, wash bays, aisles, and feed rooms, plus veterinary facilities. They are chosen wherever durability, traction, and moisture control matter. Straight-edge stall mats installed wall-to-wall over a properly prepared base provide long-term stability for stalls and aisles alike.
How do I order or get custom sizing from Mats Inc.?
You can browse the full equine selection and order directly at mats-inc.com, where horse stall mats are listed with size, thickness, and price options. Mats can be customized to fit nearly any stall, aisle, wash bay, or trailer. For non-standard layouts, contact Mats Inc. to request custom dimensions before ordering.
