Miniature Horse Stalls By Armour Horse Stalls — Barn Accessories (Our No Rust Alluminum Miniature Horse Stalls are beautiful, affordable, and…)

Miniature Horse Stalls By Armour Horse Stalls ✓ Verified

Our No Rust Alluminum Miniature Horse Stalls are beautiful, affordable, and specially designed

Got a mini that needs aluminum stalls sized just for them and built to never rust?

Reviewed by Ann Pruitt, InfoHorse.com · Updated May 2026

Miniature Horse Stalls By Armour Horse Stalls - Image 2 on InfoHorse.com

Miniature Horse Stalls By Armour Horse Stalls

Our No Rust Alluminum Miniature Horse Stallsare beautiful, affordable, and specially designed for your "Mini"s !

About Our Company
Armour Horse Stallscontinues to introduce aesthetically pleasing stall components of no rust quality which assist individuals or builders in the completion of any horse barn or equestrian center. Armour Companies innovative made to fit sizing offers another plus to owners and builders when completing the horse stalls of their respective barns. As routine, Armour manufactures stall front grilles, stall dividers, partitions and window grilles to the nearest 1/8" to accommodate new or renovated construction. This exact measurement process enables the installation of the grille components with a minimum amount of effort on the part of the installer. Most of Armour's barn doors and window shutters can also be ordered “undersized” or “oversized”.

Armour Horse Stalls

manufactures products of an attractive and durable nature by using only the highest quality aluminum materials and innovative technologies which guarantee, no rust. Our High Quality horse stall doors, gates, and grilles will compliment, illuminate and ventilate any barn. All of the Armour Companies product line arrive fully assembled and ready to install. We also provide the necessary hardware for installation and provide mounting holes for installation.

Note: Armour products are NOT "Kits", once products are received; installation is achieved with 8-16 fasteners. Some of the Armour barn products are made with or without lumber for those with discriminating taste. Our high quality aluminum equine accessories will illuminate and ventilate any barn structure and our knowledgeable staff is trained to meet each customers needs.

Our Horse Stalls Are Alluminum "NO Rust" Stalls!

You will be impressed with the beauty, durability, functionality and long lasting protection that our durable NO Rust horse stalls have to offer and all at "factory direct" savings that will keep you smiling for many years to come!

Armour's Miniature Horse Stalls

Armour’s miniature stall gates are available in three standard sizes and have the option of a straight top or unique Zephyr Gossip Top. Miniature gates are made with the same quality techniques that are used to manufacture Armour’s Stall Doors, Half Dutch Doors or Gossip Gates.

Concealed welds, capped posts, predrilled hinge and latch holes, moisture drainage vents, quality 1⁄8˝ aluminum used throughout, and miter-cut channels to name a few. The aluminum pickets (bars) in the lower portion of gates are 1˝ round tubes and have a “mini-friendly˝ 1˝ between bar spacing. Miniature Stall Doors, Stall Fronts , Grilles and Dividing Partitions are available-- call us for details.

What Sets ARMOUR HORSE STALLS Apart From Competitors?

ARMOUR has been manufacturing and shipping Full Sized Aluminum, non rusting horse stall components for Decades. ALL components arrive completely assembled and are delivered to our customers ready to install With all necessary hardware and fasteners Included for installation. NO hardware kits to purchase and NO product assembly upon arrival! This is a Huge benefit for all our clients-- we do the work so you don't have to!You'll Love The Look, and the Total Ease Of Assembly!
Armour Horse Stalls are uniquely beautiful in appearance and are sure to appeal to equine enthusiasts, equine facilities and barn contractors around the nation. With over 95 combinations of door tops and bottoms, finding an assembled product to suit any situation is easy. Sliding stall doors and hinged gates are offered in various standard sizes and customizing the size if necessary can be accomplished with little or no additional cost!
Is It True That No Preventative Maintence Is Required?
Yes and isn't that Great! The preventative maintenance of other stall components are NOT required with Armour's non-rusting, aluminum, Stall Components. Armour horse stalls and gates are assembled by skilled tradesmen and use the highest quality aluminum materials available which enables us to deliver a quality horse stall product on to you, the end consumer.

It only takes approximately 18 fasteners to install an Armour Sliding Door and a 6-12 fasteners to install a front or divider grille. At Armour, we do the majority of the work for you! Armour includes detailed instructions and has a 24 hour dedicated technical advice hotline, in the event you have a question after hours or weekends.

What Is The "Concealed Welding Technique" That Armour Gates Is Famous For?

Armour has pioneered our Much Copied “Concealed Welding” technique which is utilized throughout our product line yielding a strong, neat-in-appearance, uncluttered welded connection. Smooth lines make it almost impossible to see where they were welded. Other manufacturers offer horse stall doors and grilles that are "pictured" in an assembled state but require assembly, by you, of loose assorted pieces, shims, rubber or plastic inserts, washers and loose thin gauge vertical pickets (bars).

But I Have An Older Barn and Not All Stall Sizes Are The Same? Can Armour Help?
Often when building NEW equestrian stables or renovating existing barn stall areas its common to have varying measurements for each stall being considered which could possibly require some carpentry in order to achieve a precise fit for the components. Whether ONE stall or Several ... we routinely manufacture the stall front, divider and window grilles for Each stall per your measurements to the nearest Eighth Inchwhich avoids any unnecessary alterations or trimming to Armour products or Your stall areas. NO Assembly Required!

So, How Does That Work?
Armour will provide confirmed customers with drawings to record the specific stall size required for the project. Measurements taken on the job site can be emailed or faxed to our plant. These drawings will be utilized by skilled tradesmen in the manufacture of the components and then to identify the specific stall location once received back at your barn location. Each component built is identified and labeled for ease of installation and eliminating unnecessary carpentry or block work to fit. No Re-Measuring!

What Other Products Do You Offer?

We offer a wide range of Horse Stalls! Armour manufactures stalls, dividing stall partitions, stall doors, Dutch doors and stall gates from the highest quality materials available in the American metal market. Armour believes American products should be quality, eco friendly and economical. That is why Armour offers a superior Aluminum horse stall and sliding barn door product that will outlast its iron counterpart and have less impact on the environment

Order Your Armour Minature Horse Stalls Today!

Armour's friendly staff will offer expert advice and helpful suggestions to assist in obtaining solutions to any building issues which may surface during the building or renovation of any horse stable or equestrian facility. Our stall products are made of the highest quality materials to ensure longevity and are easy to maintain. We are happy to work with you to get you the stall product that works best for your needs. Don’t wait call and talk to us Today!

Armour aluminum no-rust miniature horse stall gate sized for minis

What makes an Armour miniature horse stall different?

Armour builds its "Mini" stall components from heavy-duty, non-rusting aluminum so they will never corrode in a humid barn the way galvanized steel eventually does. Every piece ships completely assembled with all the hardware needed to install, so you are not fabricating or welding on-site. The slogan says it plainly: "Aluminum, NO-Rust Horse Stalls! Made in America!"

Armour miniature horse stall gates installed in a barn

Who makes these stalls?

Armour Companies has manufactured aluminum, non-rusting stall components for decades from its facility in DeLand, Florida, using skilled American tradesmen. The same shop that produces full-size sliding doors, stall fronts, and dividers also fabricates the scaled-down Mini line, so the engineering and finish quality carry straight over to the smaller footprint. CNC capability lets them cut and customize components to 1/8-inch precision against a client's own measurements.

Armour crossbuck-style miniature horse stall gate in aluminum and pine

Materials and construction up close

Stall components are built from heavy-gauge, 1/8-inch non-rusting aluminum with concealed welds, reinforced header channels, counter-sunk screw placement, aluminum-channel-surrounded edges, and mitered cut corners for a clean finish. Mini gates that use wood pair the aluminum frame with #1 Southern Yellow Pine lumber, exterior-grade plywood, stainless steel tee-hinges and fasteners, a stainless steel hook-and-eye set, and a zinc-plated superlatch with receiver plates. Lumber and tongue-and-groove styles should be painted or stained to extend their lifespan.

Armour aluminum miniature sliding stall door for horses

Sizing built for a Mini, not a full-size horse
Armour's miniature gates are sized at 36" wide x 40" high, scaled for minis rather than a 16-hand horse. Mini sliding doors come in six tops to match your barn's look: Sdso Bar Top, Sdso Gossip Top, Sdso Lift Out Top, Smooth Bar Top, Smooth Gossip Top, and Smooth Lift Out Top. Because components are cut to your measurements, custom sizing is available at minimal additional cost.

How much do the Mini gates cost?

Pricing starts at $487.95 for a Smooth Mini Gate and runs through Crossbuck Mini Gates from $514.68, Tongue & Groove Mini Gates from $621.58, and Coolbreeze Mini Gates from $872.80. Gossip-top versions (an upper opening that lets minis see and socialize) start at $568.12 for Smooth and reach $899.51 for Coolbreeze Mini Gossip Gates. Each gate arrives fully assembled with all installation hardware included.

How to order and what backs it

Call Armour toll-free at or locally at (fax ), or email to request a free catalog and discuss a custom Mini layout. A 24-hour technical hotline and detailed installation instructions support the do-it-yourself install. Aluminum components carry a one-year warranty from the date of purchase covering replacement or repair of any part found defective in materials or workmanship.

Share This Solution

Facebook X LinkedIn Email

Follow Miniature Horse Stalls By Armour Horse Stalls

The Solution Section (FAQ)

What are Miniature Horse Stalls by Armour — and how do they differ from the broader Armour Barn Products line?

Per Armour Horse Stalls: specially designed Mini stalls distinct from Armour's broader Barn Products line (canonical sibling). Per the company: No Rust Aluminum Miniature Horse Stalls — beautiful, affordable, and specifically sized for Minis.

What's the precision-fit advantage?

Per Armour: stall front grilles, stall dividers, partitions, and window grilles are manufactured to the nearest 1/8" to accommodate new or renovated construction. Per the company: this exact measurement process enables installation with minimum effort. Most barn doors and window shutters can also be ordered undersized or oversized.

What does "NO RUST" mean — and what's the material?

Per Armour: products are manufactured using only the highest-quality aluminum materials and innovative technologies that guarantee no rust. Per the company: high-quality horse stall doors, gates, and grilles will compliment, illuminate, and ventilate any barn.

What sizes are the Mini stalls — and what options?

Per Armour: Mini stall gates are available in three standard sizes with the option of straight-line or angled designs.

Are these kits — or fully assembled?

Per Armour: NOT kits. Per the company: "All of the Armour Companies product line arrive fully assembled and ready to install." Hardware for installation is included; mounting holes are pre-drilled. Installation achieves with 8-16 fasteners. Some products are made with or without lumber for those with discriminating taste.

How do I order?

Per Armour Horse Stalls: Phone 800-876-7706, email [email protected], website https://www.armourhorsestalls.com/. Pricing as quoted is subject to change due to economic factors and material-market conditions.

Are Armour's miniature horse stalls actually rust-proof?

Yes. Armour builds its stall components from heavy-duty, non-rusting aluminum, and the company states that its horse stall kits NEVER RUST. Aluminum naturally resists the corrosion that affects steel in damp, ammonia-rich barn environments, which is why Armour uses it throughout its Mini line as well as its full-size products.

What size are Armour's miniature gates?

The standard miniature gate is 36 inches wide by 40 inches high, scaled specifically for miniature horses rather than full-size horses. Because Armour cuts components to your own measurements with CNC equipment, custom sizing is available at minimal additional cost if your opening differs.

What does a Mini gate cost?

Smooth Mini Gates start at $487.95, Crossbuck Mini Gates from $514.68, Tongue & Groove Mini Gates from $621.58, and Coolbreeze Mini Gates from $872.80. Gossip-top versions, which add an open upper section, start at $568.12 for Smooth and go up to $899.51 for Coolbreeze Mini Gossip Gates.

What materials go into a miniature gate?

The frame is heavy-duty, rust-proof aluminum. Wood styles add #1 Southern Yellow Pine lumber and exterior-grade plywood, joined with stainless steel tee-hinges and fasteners, a stainless steel hook-and-eye set, and a zinc-plated superlatch with latching receiver plates. Lumber and tongue-and-groove styles should be painted or stained to extend their lifespan.

Do the stalls arrive assembled or as a pile of parts?

They arrive completely assembled. Armour fabricates the components in DeLand, Florida and delivers them ready to install, with all the hardware you need included in the package. As the company puts it, 'At Armour, we do the majority of the work for you.'

What top styles are available for mini sliding stall doors?

Mini sliding doors come in six tops: SDSO Bar Top, SDSO Gossip Top, SDSO Lift Out Top, Smooth Bar Top, Smooth Gossip Top, and Smooth Lift Out Top. This lets you match the look of the rest of your barn while keeping the scaled-down proportions appropriate for a Mini.

What is a 'gossip' top and why would I want one for a mini?

A gossip top is an open upper section that lets the horse see out and socialize over the gate or door. For miniature horses, which are highly social, a gossip-top gate or door keeps them engaged with the activity in the aisle and with neighboring animals while the lower panel keeps them safely contained.

Can Armour build a stall to my exact dimensions?

Yes. Armour manufactures components to 1/8-inch precision based on the measurements you provide, using CNC capability for design diversity. Custom sizing is offered at minimal additional cost, so a Mini stall can be tailored to an existing opening or a non-standard barn layout.

Where are Armour stalls made?

Every component is made in America at Armour's facility in DeLand, Florida, by skilled American tradesmen. The company has manufactured aluminum, non-rusting stall components for decades and markets its products under the line 'Aluminum, NO-RUST Horse Stalls! Made in AMERICA!'

What hardware comes with a sliding door package?

Stall front packages include a sliding door track, a heavy-duty trolley system, aluminum stops, an adjustable heavy-duty stay roller, a super latch, and fasteners. Sliding door kits feature a rounded track, ball-bearing trolleys, aluminum door stops, a slide-bolt latch, and a heavy-duty stay roller.

Is there a warranty?

Yes. Armour warrants its aluminum components for one year from the date of purchase, covering replacement or repair of any part found defective in materials or workmanship. The warranty does not cover normal wear, or damage caused by neglect, abuse, or improper operation.

How is Armour aluminum constructed for strength?

Components use heavy-gauge aluminum with concealed welds, reinforced header channels, counter-sunk screw placement, aluminum-channel-surrounded edges, and mitered cut corners. The concealed welding technique gives a neat appearance while the heavy-gauge stock and reinforced channels deliver the durability needed for a working stall.

Why choose aluminum over steel for a mini's stall?

Aluminum will never rust, where steel components eventually corrode in the moisture and ammonia of a stall. Aluminum is also low-maintenance and lightweight, which makes the assembled components easier to handle and install while still being heavy-duty enough to contain an active miniature horse for years.

How do I order a miniature stall from Armour?

Call toll-free at 800.876.7706 or locally at 386.740.7459, fax 386.740.9077, or email [email protected]. You can request a free catalog to view the full range of Mini doors and gates and discuss a custom layout with the team.

Does Armour offer support if I install the stall myself?

Yes. Each product ships with detailed installation instructions, and Armour provides a 24-hour technical hotline for questions during the install. Because the components arrive fully assembled, a sliding door typically mounts with roughly 18 fasteners and a grille with 6 to 12.

Can I customize the look of the stall front?

Yes. Armour offers over 200 graphics to personalize stall front panels, all created from their own lumber, so you can 'create a story for each individual stall.' If the stock options do not suit your needs, you can send your own image and Armour will do its best to recreate it.

Beyond minis, what else does Armour make?

Armour produces sliding stall doors with 95-plus top and bottom combinations, stall front and divider packages, Dutch doors, barn doors and windows, stall gates (including half, gossip, and dog gates), stall grills with 1- to 3-inch bar spacing, stall panels, and components such as blanket bars, chew guards, stall mats, bedding blockers, and whelping boxes.